Low-VOC Hot Melt Adhesive Web for Automotive Headliner and Interior Lamination

Low-VOC Hot Melt Adhesive Web for Automotive Headliner and Interior Lamination

Interior air quality has become one of the hardest specifications to meet in vehicle manufacturing. Every material inside the cabin contributes to the total volatile organic compound budget, and adhesives are traditionally one of the largest contributors. JCC has responded with a family of solvent-free copolyamide and copolyester hot melt adhesive webs that deliver structural bonding for headliners, sun visors, door panels, parcel shelves and seat components while keeping odour and emissions extremely low.

Because the web is 100 percent solid and contains no solvent or water, there is no drying step and no residual carrier to evaporate inside the vehicle. Lamination lines bond and cool in seconds, which shortens cycle time, removes ovens and dramatically reduces the floor space and energy required for each production cell.

Key Performance Advantages

• Low emission and low odour: no solvent residue, compliant with common automotive interior VOC and fogging requirements.
• Fast dry lamination: activation in 8-15 seconds on standard flat-bed or continuous laminators.
• Excellent heat and ageing resistance: retains peel strength in the high cabin temperatures reached during summer parking.
• Soft, non-woven structure: does not stiffen fabric, foam or felt, preserving the tactile quality of the headliner surface.
• No strike-through: controlled melt flow prevents adhesive from bleeding through thin decorative fabrics.
• Versatile substrate range: bonds fabric to foam, fabric to felt, fabric to plastic and film to non-woven.

Available Grades

Applications in Vehicle Interiors

• Headliner fabric to PU foam and fibreglass backing
• Sun visor fabric wrapping and edge bonding
• Door panel, armrest and console trim lamination
• Parcel shelf and trunk trim assembly
• Seat trim, seat back and headrest bonding
• Acoustic felt and insulation panel assembly

Quality, Certification and Supply

JCC adhesives are already used in automotive programmes for international brands including Ford, BMW and Hyundai, and the company operates ISO 9001 certified production with batch-level traceability. Webs are supplied in rolls of 100 to 1000 metres with widths from 20 mm to 1600 mm, slit to the exact width required by the customer laminating line. Typical lead time is 14-20 days, with a monthly capacity of more than one million square metres of film and web.

From JCC Tianyang--an expert and leading hot melt adhesive solution supplier

2026.10.15